6. Remote Operation
This chapter provides operational instructions for the remote interface for the MeasureReady™ M81-SSM Synchronous Source Measure System. The MeasureReady™ M81-SSM supports the following remote interfaces for direct user control:
USB
Ethernet
GPIB
Once connected via any of these interfaces, the M81-SSM can be remotely operated in any of the following ways:
Python: Using the Lake Shore Python driver
LabVIEW: LabVIEW driver
Other: IVI driver
Other: Directly sending SCPI commands from your application
The M81-SSM adheres to the Standard Commands for Programmable Instruments (SCPI) standard, regardless of the remote interface selected for user control.